Multicore Flat Cables, PVC Insulated Multicore Flat Cables, PVC Sheathed Multicore Flat Cables, PVC Flexible Cables, Mumbai, India

Multicore Flat Cables, PVC Insulated Multicore Flat Cables, PVC Sheathed Multicore Flat Cables, PVC Flexible Cables, Mumbai, India

 

Multicore Flat Cables Multicore Flat Cables

Multicore Flat Cables

The PVC insulated and sheathed multicore flat cables are used for giving electrical connection to the submersible pump motors. These are manufactured keeping in mind the severe, tough and difficult conditions in which they have to operate. The slot available in the tube well being narrow the shape of the cables has to be suited for such an application.

These cables conform to and are marked IS 694: 1990. Manufactured from bright-annealed 99.97% pure bare copper conductors these cables have low conductor resistance. The inner cores are insulated with a special grade PVC compound. The tough outer PVC jacket protects it from oils, greases, various chemicals and abrasions, thereby giving long life and electrical safety.

 
Working voltage   1100 V 
Temperature range 15 deg C to +70 deg C
Sizes  1.5 to 4.0 sq mm with ISI mark 6.0 to 95 sq mm generally conforming to IS 694:1990 
Color codes Cores Red, Yellow and Blue 
Black outer sheath 
Grey sheath on specific request 
Specification  IS 694:1990 
Packing  500 / 1000m on drums
 
Area
(Nom.)
Sq. mm
Number / size
of wire mm 
Insulation Thickness (Nom.) mm Sheath Thickness (Nom.) mm Width 'W' mm  Thickness
 'H' mm
Resistance @ 20 C (max.) Ohm/Km Current carrying capacity @ 40 C Amps.
1.5 22/.3 0.6 0.9 11.0 5.0 12.10 14
2.5 36/.3 0.7 1.0 13.0 6.0 7.40 18
4.0 56/.3 0.8 1.0 15.3 6.7 4.95 26 
6.0 84/.3 1.0 1.15 18.7 7.9 3.30 31
10.0 140/.3 1.0 1.40 23.7 9.9 1.91 42
16.0 226/.3 1.0 1.40 28.0 11.4 1.21 57
25.0 354/.3 1.2 2.0 35.5 14.7 0.780 72
35.0 495/.3 1.2 2.0 39.5 16.2 0.554 90
50.0 703/.3 1.4 2.20 45.5 18.3 0.386 115 
70.0 360/.5 1.4 2.20 51.0 20.0 0.272 143
95.0 475/.5 1.6 2.40 60.0 23.5 0.206 165

Note: Insulation thickness, Sheath thickness and overall dimensions given in this table are nominal values. The number of wires is approximate and strand diameter is nominal; they shall be such as to satisfy the requirements of conductor resistance as per IS 8130/1984.

1) HP Vs Current :The full load current for submersible pump motors, 3 phase, 50 cycles, 415 ~ 425 V. 

HP 

5.0

7.5

10.0

12.5

15.0

17.5

20.0

25.0

30.0

35.0

 40.0

45.0

50.0

55.0

60.0

 65.0

 70.0

75.0

80.0

Amp 

7.5

11.0

14.9

18.9

22.5

25.2

28.4

35.6

42.3

50.4

58.1

62.1

67.5 

73.8

81.0

87.3

 93.6 

100.8

108.0


 

2) Derating Factors : Multiply the current carrying capacity of the cable by factors given below for various ambient temperatures.

Ambient Temperature C

30

35

40

45

50

Derating Factor

1.09

1.04

1.00

0.95

0.77


 

Best view : 1024 x 768 Pixels

Designed & Hosted by : MID   Promoted by : GID