Flame Retardant Low Smoke Cables, Electrical Cables, Flexible Cables, Household Wires, FRLS Cables, Mumbai, India

Flame Retardant Low Smoke Cables, Electrical Cables, Flexible Cables, Household Wires, FRLS Cables, Mumbai, India

 

Flame Retardant Low Smoke Cables Flame Retardant Low Smoke Cables

Flame Retardant Low Smoke Cables

Fire is one of the major hazards to life and property. And electrical cables are perhaps one prime sources of generation and propagation of fire. Protection of cables against fire is therefore an important and primary consideration is in the design and manufacture of cables. Scientists and Engineers all over the world have been seriously concerned, about behavior of electrical cables under fire. Extensive studies and rigorous research into materials and construction of cables has led to the development of fire retardant cables.

In the event of fire the major reasons for destruction and loss are fire propagation emission of corrosive gases and formation of dense smoke KAYDOUR FRLS Cables offer effective resistance against propagation of fire and do not emit corrosive gases and smoke generated during fire of negligible amount .  

Kaydour Cables are manufactured from superior quality raw materials and Fire Retardant Low Smoke (FRLS) Sheaths conforming to accepted Indian Standard Specifications.

Conductor : Annealed Copper/Aluminium Wire Solid or Compact Conforming to IS:8130
Insulation : General Purpose PVC/HR PVC conforming to IS:5831
Cores (Colour Code) : Colours scheme for identification of cores as per IS:1554

1 core: Red, Black, Yellow or Blue
2 cores: Red, Black
3 cores: Red, Yellow, Blue
4 cores: Red, Yellow, Blue, Black
5 cores: Red, Yellow, Blue, Black and gray
6 cores and above : Blue and Yellow for two adjacent cores in each layer.
gray for remaining cores. Black for reduced neutral conductors

Inner Sheath : General Purpose PVC/ FRLS PVC by extrusion
Armour : Galvanized steel strip/wire and hard drawn aluminium wire conforming to IS:3975 and IS:1554
Outer Sheath : FRLS PV

Flame Retardant Low Smoke Cables

1. Power Stations and Factories where a large group of cables are used.

2. Public Premises Like Hospitals, Multistoried buildings, Super Markets, Theaters, Cinemas, Airports etc. where there is always a large concentration and movement of people.
 

1 Non -propagation of fire reduces risk of life and property.

2 Absence of non-corrosive gases.
Corrosive gases by themselves or when combined with atmospheric moisture or with water from fire fighting appliances produce highly corrosive acids which damage plant, machinery and equipment . Emission of non-corrosive gases help to prevent such extensive damage resulting in large savings.

3 Reduced emission of dense smoke
In enclosed or less ventilated areas emission of dense smoke may prove a major handicap affecting visibility and evacuation operations. Low smoke emission from cables assures adequate indoor visibility and helps in easy accessibility to the seat of fire, and effective fire -fighting operations and prompt evacuation.
 

Best view : 1024 x 768 Pixels

Designed & Hosted by : MID   Promoted by : GID